DMS 80 Bank / DMS 160 Bank / DMS 240 Bank / DMS 240 HSR Bank
www.dallmeier.com
39
General comparison of the search modes
If one compares the two search modes, it becomes clear that more search results (hits)
result during an intersection search than during a balance point search.
However, there is a danger at a balance point search that too few search results are availa
-
ble and that a relevant event is not listed.
If you cannot define the search range (marking) exactly at first, you should first activate
the intersection search mode. After a rough analysis you can set your marking again and
specify a narrower selection with the balance point search.
8.6
Use database
In the
Camera settings
dialog (see documentation entitled
Configuration
) you can decide
whether the recording should be made using the database (DB).
Index search
and
Advanced search
allow to access the database.
¾
Click on the
DB
button to toggle between “Use DB” and “Do not use DB”.
Fig. 8-18 : Use
DB
Fig. 8-19 : Do
not
use
DB
Whether it is beneficial to use the database for the search depends on a large number of
factors. We recommend that you use the software setting. If the result is unsatisfactory, you
may attempt to improve performance by switch the DB on or off.
