DLS 4 / DLS 8 / 8 PLUS / DLS 16 / 16 PLUS
63
Dallmeier electronic
The default settings will be adopted for all connected cameras. The memory will be assigned
in equal parts to every camera. Recording (permanent) will be activated for all connected
cameras.
Ø
Configure the recording as described above.
8.6
Activation
Recording in a camera’s LP-track or S-track can be activated anytime. When no recording
configuration is done (see above) the default settings of the
Permanent
recording mode
will be valid.
Ø
Left
-click the corresponding recording button.
The button will be displayed in a color corresponding to the set recording mode.
Fig. 8-28: Recording buttons
Ø
Proceed analogous for all relevant cameras.
Ø
Finally confirm the
Recording Settings
dialog with
OK
.
8.7
Video memory
The recorder can be operated in
three
different
track modes
. These differ basically in regard
to the storage concept and therefore in regard to the configuration of the video memory.
8.7.1
Standard
In the Standard track mode every camera / track is assigned a particular part of the entire
video memory manually (track size).
IMPORTANT
In the
Standard
track mode all recordings need to be deleted
if the video memory configuration is modified..
8.7.1.1
Longplay tracks
The video memory for the single Longplay tracks is defined directly in the
Recording Set-
tings
dialog. This can be done with two variables:
No recording
Permanent
Motion
Contact
