dallmeier DLS 24 S1, Руководство по установке и настройке

Страница: 56 / 215

56 Dallmeier electronic GmbH & Co.KG
Digital HD Recorders DMS/DLS
¾
If the picture is to be switched to for both contact and motion
detection, select All here.
The amount of time for which the picture is displayed is set to 5
seconds and is derived from the set switching speed.
Irrespective of the "standard" sequencer mode, a picture is always
switched to when the motion detector detects a change and/or a
contact is triggered.
7.6 Settings for Monitor 2
If you have connected a second monitor to output M2, you can
make additional settings for this output.
Monitor 2 as Monitor 1
If the settings for Monitor 1 are also
to apply to Monitor 2,
¾
mark the checkbox next to Mo-
nitor 2 as Monitor 1 on the Mo-
nitor 2 tab.
Separate setting for Monitor 2
If you want to make the settings for Monitor 2 independent of Mo-
nitor 1, deactivate the checkbox next to Monitor 2 as Monitor 1
on the Monitor 2 tab.
7.6.1 Deactivating picture on Monitor 2
If you use the USB mouse to operate the DMS/DLS, the display of
menus on the FBAS monitors is generally suppressed.
When playing back recorded pictures, you will also see this playback
on the FBAS monitors.
Fig. 7-6