DIS-2/M StreamerPro HDD Large UTP
60
Dallmeier electronic
14.2
Replace the HDD
CAUTION
Risk of data loss and/or damage to the hard disk drive.
Ensure that the streamer has disconnected from the power
supply before you replace the HDD drawer unit.
IMPORTANT
Damage to components at risk from electrostatic discharge
caused by touching them.
Ensure that you are electrostatically discharged (earthed) before
you touch the HDD drawer unit.
Wear suitable ESD shoes or an earth strap.
1. Disconnect the streamer from the power supply.
2. Release the HDD drawer unit using the wrench supplied.
Pull it out carefully.
3. Undo the four screws on the underside of the HDD drawer unit.
Remove the defective HDD.
Fig. 14-1: Unlock the HDD drawer unit
Fig.14-2: Remove the HDD drawer unit
Fig. 14-3: Screws loosen
Fig. 14-4: Remove the HDD