DF3000IP(-DN) / DF3000IP(-DN) CasinoCam
®
31
Dallmeier electronic
10 Network settings
To avoid network conflicts, you should clarify whether the intended changes are permitted
before you change the network settings. In particular, the allocation of an IP address that
has already been used may result in malfunctions.
10.1
General settings
¾
Open the Network settings dialog via Common settings > Network ....
¾
First select the appropriate
Link speed for the current
LAN. In most cases the default
setting automatic will suffice.
If you check the DHCP option, you
will connect to the existing network
without any further configuration.
In this case the camera obtains its network settings from a central DHCP server.
However, it must be taken into account that an active DHCP server must be available in the
network.
Otherwise no IP address will be assigned to the camera. In this case, the camera cannot be
configured anymore via a browser (changing the IP address manually).
IMPORTANT
Ensure that an active DHCP server is available in the network
before activating DHCP. Contact your network administrator if
necessary.
¾
If DHCP is not selected, enter the IP-Address, Netmask and Gateway for the camera.
¾
Click OK to apply your settings.
NOTE
After changing the network settings, the connection to the
camera will be broken. You have to log in again.
Fig. 10-1