background image

14

COMMISSIONING – DDZ5200HD Outdoor Series | REV. 1.0.0 | © 2021 Dallmeier 

6  General Notes

Warranty

The terms and conditions valid at the time the contract was signed shall 
apply.

Scope of Delivery

The standard scope of delivery includes:

• 

1×  Pair of gloves for a better grip during mounting (or removal) of the  
  device and to avoid fingerprints on the device (especially on the  
  polycarbonate dome bubble)

• 

1×  Flexible rubber sleeve (bellows) for sealing the cable entry

• 

1×  Hexagon socket screw key (wrench size 5)

• 

Product documentation

The scope of delivery may differ depending on the ordered equipment, 
device variant or country of destination.

NOTICE

Possible damage to the surface coating of the polycarbonate dome bubble 
as well as reduced image quality due to fingerprints

 

Do not touch the polycarbonate dome bubble with bare fingers.  
Instead, always use the supplied pair of gloves to prevent a reduction 
in image quality due to fingerprints and to protect the surface coating 
of the dome bubble from possible damage caused by sweat and grease 
deposits.

Содержание DDZ5200HD Series

















































































Отзывы: