manualshive.com logo in svg

dallmeier DDF51 HDV-DN-SM Series, Пусконаладка

Поделиться
Скачать
dallmeier DDF51 HDV-DN-SM Series Скачать руководство пользователя страница 16

16

 

© 2018 Dallmeier | www.dallmeier.com 

DDF51(X)0HDV-DN-SM Commissioning

Approvals/Certifications

The following approvals/certifications were valid for the device at the time of this 

document’s compilation:

• 

CE, FCC, RCM, UL, DIN 50130-4 compliant

Visit www.dallmeier.com for possible updates.

Note (USA)

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference when the equipment is operated in a commercial 

environment. This equipment generates, uses, and can radiate radio frequency energy and, if 

not installed and used in accordance with the instruction manual, may cause harmful interfer-

ence to radio communications. Operation of this equipment in a residential area is likely to 

cause harmful interference in which case the user will be required to correct the interference 

at his own expense.

Содержание DDF51 HDV-DN-SM Series





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды