Rev. 2.0.0 | © 2019 Dallmeier | www.dallmeier.com
31
Commissioning DDF5(X)50HDV-DN-SM
➡
Mark the drill holes for the mounting screws on the ceiling/wall (use the
delivered drilling template).
➡
At the marked locations, drill holes fitting the used screws/anchors.
➡
Push anchors that are suitable for the ceiling/wall type and construction
material into the drill holes.
➡
Mount the housing base with three screws (incl. O-rings) to the ceiling/wall.
NOTICE:
Tighten the three mounting screws slowly and with normal force to avoid
damage to the O-rings.
