www.dallmeier.com
19
Commissioning DDF4520HDV-DN-SM
NOTICE
Damage to the device resulting from improper power
supply
The device can be powered via Power over Ethernet
(PoE, Class 0, IEEE 802.3af) or supplied with a separate
12 V DC power supply unit.
However, always beware not to use both power
sources simultaneously.
In order to comply with UL’s requirements, always
use a UL-certified, Limited Power Source (LPS) Class 2
power supply unit when operating the device with a
separate 12 V DC power supply unit.
You need:
• Torx screwdriver (T20)
• Marking tool (e.g. awl)
• Electric drill
• 3× dowels
• 3× mounting screws (Ø 4 mm)
• Screwdriver (for mounting screws)
• PG16 cable gland
Содержание DDF4520HDV-DN
