dallmeier DDF3000A3, Руководство по установке и настройке

Страница: 17 / 41

17
Dallmeier electronic GmbH & Co.KG
6 Installation
6.1 Requirements at the installation site
The DDF3000A3 is designed for indoor use. Unfavorable local
conditions may shorten the life of the product or lead to
malfunctions.
Do not install/operate the camera in places:
z
with large scale dust and dirt
z
with steam or oil vapors (e.g. kitchen)
z
if placed in direct sunlight
z
with an ambient temperature below 0 °C or above 50 °C.
z
near sources of strong radiation, i.e. X-rays, radio transmitters
or magnetic fields
z
with corrosive surroundings (e.g. gases or salt water)
6.2 Assembly
Use the template included for mounting the camera.
1. Make an incision in the center of the film.
2. Guide the cables suspended from the
wall/ceiling through the film.
3. Position the film with respect to the
subsequent camera position.
4. Adhere the film using a minimum of
pressure.
5. Mark the drill holes for the securing
screws.
6. Carefully peel off the film.
7. Drill the holes for the securing screws.
8. Connect the power supply/video cable.
Fig. 6-1