DDF3000AV(-DN) / DDF3000AV(-DN) CasinoCam
®
12
Dallmeier electronic
6
Installation
6.1
Requirements at the installation site
The DDF3000AV(-DN) is designed for indoor and outdoor use. Unfavorable local conditions
may shorten the life of the product or lead to malfunctions.
Do not install/operate the DDF3000AV(-DN) in places:
z
with large scale dust and dirt
z
with steam or oil vapors (e.g. kitchen)
z
with direct sunlight
z
with improper ambient temperatures (see technical data)
z
near sources of strong radiation (i.e. X-rays, radio transmitters or magnetic fields)
z
with corrosive surroundings (e.g. gases or salt water)
6.2
Installation without casing floor
Use the template included for mounting the camera:
1. Make an incision in the center of
the film.
2. Guide the cables suspended
from the wall/ceiling through the
film.
3. Position the film with respect to
the subsequent camera position.
4. Adhere the film using a minimum
of pressure.
5. Mark the drill holes for the
securing screws.
6. Carefully peel off the film.
7. Cut out the recess for the camera
holder.
NOTE
The diameter of the recess may be a maximum of 5 mm larger
than the recess for the adapter ring.
Fig. 6-1
