manualshive.com logo in svg

Dallas Semiconductor DS2154, Руководство пользователя, Страница: 36 / 71

Поделиться
Скачать
Dallas Semiconductor DS2154 Скачать руководство пользователя страница 36

DS2154

071498 36/71

RS1 TO RS16: RECEIVE SIGNALING REGISTERS (Address=30 to 3F Hex)

    (MSB)

(LSB)

0

0

0

0

X

Y

X

X

A(1)

B(1)

C(1)

D(1)

A(16)

B(16)

C(16)

D(16)

A(2)

B(2)

C(2)

D(2)

A(17)

B(17)

C(17)

D(17)

A(3)

B(3)

C(3)

D(3)

A(18)

B(18)

C(18)

D(18)

A(4)

B(4)

C(4)

D(4)

A(19)

B(19)

C(19)

D(19)

A(5)

B(5)

C(5)

D(5)

A(20)

B(20)

C(20)

D(20)

A(6)

B(6)

C(6)

D(6)

A(21)

B(21)

C(21)

D(21)

A(7)

B(7)

C(7)

D(7)

A(22)

B(22)

C(22)

D(22)

A(8)

B(8)

C(8)

D(8)

A(23)

B(23)

C(23)

D(23)

A(9)

B(9)

C(9)

D(9)

A(24)

B(24)

C(24)

D(24)

A(10)

B(10)

C(10)

D(10)

A(25)

B(25)

C(25)

D(25)

A(11)

B(11)

C(11)

D(11)

A(26)

B(26)

C(26)

D(26)

A(12)

B(12)

C(12)

D(12)

A(27)

B(27)

C(27)

D(27)

A(13)

B(13)

C(13)

D(13)

A(28)

B(28)

C(28)

D(28)

A(14)

B(14)

C(14)

D(14)

A(29)

B(29)

C(29)

D(29)

A(15)

B(15)

C(15)

D(15)

A(30)

B(30)

C(30)

D(30)

SYMBOL

POSITION

NAME AND DESCRIPTION

X

RS1.0/1/3

Spare Bits.

Y

RS1.2

Remote Alarm Bit (integrated and reported in SR1.6).

A(1)

RS2.7

Signaling Bit A for Channel 1.

D(30)

RS16.0

Signaling Bit D for Channel 30.

Each Receive Signaling Register (RS1 to RS16) reports
the incoming signaling from two timeslots.  The bits in
the Receive Signaling Registers are updated on multi-
frame boundaries so the user can utilize the Receive
Multiframe Interrupt in the Receive Status Register 2
(SR2.7) to know when to retrieve the signaling bits.   The
user has a full 2 ms to retrieve the signaling bits before
the data is lost.  The RS registers are updated under all
conditions.  Their validity should be qualified by check-
ing for synchronization at the CAS level.  In CCS signal-
ing mode,  RS1 to RS16 can also be used to extract
signaling information.  Via the SR2.7 bit, the user will be
informed when the signaling registers have been loaded

with data.  The user has 2 ms to retrieve the data before
it is lost.  The signaling data reported in RS1 to RS16 is
also available at the RSIG and RSER pins.

A change in the signaling bits from one multiframe to the
next will cause the RSA1 (SR1.7) and RSA0 (SR1.5)
status bits to be set at the same time.  The user can
enable the INT pin to toggle low upon detection of a
change in signaling by setting either the IMR1.7 or
IMR1.5 bit.  Once a signaling change has been
detected, the user has at least 1.75 ms to read the data
out of the RS1 to RS16 registers before the data will be
lost.

RS1 (30)

RS2 (31)

RS3 (32)

RS4 (33)

RS5 (34)

RS6 (35)

RS7 (36)

RS8 (37)

RS9 (38)

RS10 (39)

RS11 (3A)

RS12 (3B)

RS13 (3C)

RS14 (3D)

RS15 (3E)

RS16 (3F)

Содержание DS2154








































































Отзывы:

Нет отзывов