For the best results with your DALI Phrame and
Euphonia/Helicon Phantom loudspeakers, mount
DALI Phrame in the desired position on the wall.
Following the instructions in the owner’s manual
included with the loudspeakers, mount your Eupho-
nia/Helicon Phantom in DALI Phrame as if it were
the wall.
Placement of DALI Euphonia/Helicon Phantom
First, measure and mark the desired location for DALI
Phrame and the loudspeaker. For optimum perform-
ance, please follow the placement guidelines in the
owner’s manual enclosed with the loudspeakers.
The job is easier with an assistant to hold DALI
Phrame in place at the mounting site while you
mark the four points where holes are to be drilled
for rawl plugs/wall anchors. Make certain that the
marks are correctly placed horizontally, so that the
loudspeakers are perfectly level.
After making the marks, drill holes for the rawl
plugs/wall anchors with a drill.
After drilling the holes, insert rawl plugs/wall an-
chors in the holes.
While your assistant holds the DALI Phrame, attach
the frame to the wall with the four mounting screws.
After properly mounting DALI Phrame, loudspeaker
cables should be pulled through the cable holes
in DALI Phrame. Connect loudspeaker cables as
shown in the loudspeaker owner’s manual.
Mount DALI Euphonia/Helicon Phantom in DALI
Phrame and tighten the screws in the loudspeaker’s
doglegs, but do not tighten them completely. When
the screws are almost completely tightened, center
the loudspeaker precisely in DALI Phrame and fin-
ish tightening the screws.
Installation of DALI Phrame
· 3 ·
206
50
2
3
4
5
6
7
8
9
