Dali OBERON C Series Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 19

Dali OBERON C Series Скачать руководство пользователя страница 14

4. Speaker Connecting and Configuring

14

Press the LINK & CONNECT button on the SOUND HUB or
SOUND HUB COMPACT

A

. It will indicate speaker connection

mode as described in its user manual.

•

Now return to one of the OBERON C speakers in your system
and press its rear panel LINK & CONNECT button

B

. The power

indicator will illuminate green and the speaker channel matrix
indicators will illuminate cyclically while connection to the SOUND
HUB or SOUND HUB COMPACT is underway.

•

When connection is established, the cyclic illumination will stop,
leaving just the left and right channel matrix indicators flashing
slowly. The speaker will play a short confirmation tone.

•

With the speaker connected to the SOUND HUB or SOUND
HUB COMPACT, it can be assigned to either the left or right
channel. The channel matrix display on the speaker rear panel
incorporates indicators at each channel position.

Pressing the speaker LINK & CONNECT button changes the
channel specified for the speaker

C

. If the first speaker is to be

assigned to the left channel, the LINK & CONNECT button will
only need to be pressed once because the left channel is the
default. If the first speaker is to be assigned to the right channel,
press the LINK & CONNECT button twice to select the right
channel.

•

With the first speaker connected to the SOUND
HUB or SOUND HUB COMPACT and its channel
assigned, move to the second speaker and repeat
the process

D

E

.

•

When both speakers in the system are connected
and their channels assigned, return to the SOUND
HUB or SOUND HUB COMPACT and press its
LINK & CONNECT button to complete the speaker
connection process

F

. Both speakers will play

a short confirmation tone and the SOUND HUB
or SOUND HUB COMPACT will exit speaker
connection mode.

The SOUND HUB or SOUND HUB
COMPACT connection procedure is
illustrated in

.

C

E

«
...
12
13
14
15
16
...
»

Содержание OBERON C Series




















Отзывы:

Нет отзывов