8
2.2
Interface
[3] USB
For data transfer and charging
[4]
Indicator
For charging indication
3
Basic operation
3.1
The battery cannot be replaced
3.2
Quick Start
3.2.1
Obtaining thermal images
Long press the power key (more than 3 seconds) until the power light
turns green. About 10 seconds later, the device is initialized and enters
the working state.
The thermal imager is free of focusing and can make the target image
clear without focusing operation.
3.2.2
Temperature measurement
Move the cross temperature measuring point on the screen to the target
object, and the "XX" displayed in the upper left corner of the screen is the
temperature of the target.
When the target temperature is greater or less than the upper or lower
