DALEMANS sa/nv
Rue Jules Mélotte 27A
B-4350 Remicourt
+32 19 33 99 43
U•V6
Instruction Manual
35
|
65
Certified
ISO9001 • VCA
Fault menu
Tech. fault address.
Addressing technical faults to the programmable relays
Power fail. address.
Addressing of mains power faults to the programmable
relays
a)
Technical-Fault Addressing
The
Tech. Fault Address
.
sub-menu allows the user to address each relay respectively and
specifically in the event that a technical fault is detected.
The following configurations are possible:
▪
Unaddressed:
the selected programmable relay will not be activated by a technical
fault.
▪
Addressed
: the selected relay will switch when a technical fault is detected.
▪
Siren Mode
: the selected relay, Z, will act like an output siren: the relay will be
triggered when there is an alarm, but it will be possible to disarm it by
pressing
MUTE/RESET
on the keyboard.
Alarm relay x
Not addressed / addressed
The U•V6 unit also has a dedicated output for connecting a DC-powered siren. It is possible
to associate the activation of this output with the detection of a technical fault using the
following setting:
Siren output
Not addressed / addressed
b)
Power-Failure Addressing
A Power Failure is activated when the power from the network is missing and the unit
switches to its battery.
Its addressing to the programmable relays is configured in the same way as technical-fault
addressing.
Any enabling or disabling of settings should be carried out by a technician certified by
DALEMANS
.
