MINI 1CV CASAMBI
PRELIMINARY
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
–
Rev.
09/08/2022 -
Pag.
4/8
WIRING DIAGRAM
As show in the wiring diagram carry out the following steps for the installation of the product
Connect the positive of the LED load to the “LED”
terminals
with the symbol “+”,
and the negative of the LED load to the
“LED”
terminals
with the symbol “
-
“.
Connect the N.O. push button to the INPUT
terminals with the “
” symb
ol.
Be sure not to connect live parts to the PUSH N.O.
Connect a 12-24-48 Vdc constant voltage SELV power supply (depending on LED load plate data) to the DC IN terminal
with the symbols “+” and “
-
”.
Be sure not to use constant current LED Driver and check that the polarity of the cables is correct.
Like any other Bluetooth enable product, make sure you don’t place the product inside a metal case or next to large metal
structures. The metal will greatly block the radio signal important for the correct operation of the device.
