DLM
Single Channel
BUS
Device Manual
EASY-BUS
FW 1.2
Made in Italy
Rev. 2018-07-23
pag. 5/11
LOCAL COMMAND
➢
PUSH DIMMER FEATURE
The intensity and the status change (ON/OFF) are controlled by the N.O. push button.
Button
Intensity
Click
Double Click
Long pressure (>1s) from OFF
Long pressure (>1s) from ON
On/Off
Maximum intensity
Turn ON at 1% (Nightly Time), then dimmer up/down
Dimmer up/down
15 Click in 5 second-time
Enter in to PUSH MENU’
➢
0-10V & 1-10V & POTENTIOMETER FEATURE
The intensity is controlled by input voltage variation.
Input
Intensity
0÷10V
1÷10V
Potentiometer 10K
Dimmer: 0-1V=0% 10V=100%
➢
ANALOGIC AUTOMATIC DETECTION
AUTOMATIC DETECTION OF THE TYPE OF LOCAL COMMAND
At the first switch the device is set by default to automatic recognition of push button N.O. command.
✔
AUTOMATIC DETECTION OF THE 0/1-10V & POTENTIOMETER COMMAND
The automatic recognition of analog signal 0/1-10V or potentiometer starts as soon as a 0/1-10V value between 3V and 7V is sent out or setting the
potentiometer with a value included from 30% and 70%.
0-10V COMMAND
1-10V COMMEND
POTENTIOMETER
✔
AUTOMATIC DETECTION OF THE N.O. PUSH BUTTON COMMAND
The N.O. push button is identified automatically after 5 clicks in rapid sequence.
In mode N.O. push button, function memory is always active.
N.O. PUSH BUTTON
DLM 1248 singolo canale BUS
LED DRIVERS
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
[email protected] www.dalcnet.com
IN
COM
INPUT
0-10V
+ -
BUS
IN
COM
INPUT
1-10V
+ -
BUS
POTENTIOMETER
10K
Ω
IN
COM
INPUT
BUS
PUSH BUTTON N.O
IN
COM
INPUT
BUS
M
U
L T
I
I N
P
U
IN
A N A L O
G
I C
A
U
T
O
M
A
T
I C
D
E
T
E
C
T I
O
PA TENT
PENDING
