DGM01
– SERVER GATEWAY – FW 3.0
Gateway ETHERNET-MODBUS-DMX512A-DALI
Function manual
Made in Italy
Rev. 2016-09-19
pag. 15/22
NEW: BUS Manager
On BUS Manager page is possible to:
→ Enter BUS1 Managing page:
No managing provided.
→ Enter BUS2 Managing page:
No managing provided.
→ Enter BUS3 Managing page:
When the Bus is configured as
DALI Master
, it’s possible to
monitor, address and manage DALI devices connected on DALI
BUS.
In
Manage BUS3
section there is a drop-down menu with which is
possible to choose three operating modes that allow a complete
configuration of a DALI system:
-
RUN Gateway
-
Address Devices
(drag&drop)
-
Config Devices
NEW: DALI BUS Manager - RUN Gateway
RUN Gateway
Function
When this function is selected on the drop-down menu, the Gateway
works on its standard operating mode.
On this operating mode, the 64 devices (i.e. a DALI universe) that can be
managed are displayed in a grid.
It is possible to display the state of the connected devices directly on the
grid; every grid box (i.e. every single device) can be shown with the
following colours:
-
GREY
: the device is not present or does not respond
-
GREEN
: the device works properly
-
ORANGE
: the device works properly;
the lighting source could be disconnected or not working
properly
-
RED
: some devices respond to the same address, or there are some
communication errors in the system
Server Gateway
CONTROLLERS
DALCNET S.r.l.
Registered office: via Meucci, 35 - 36040 Brendola (VI) - Italy
Headquarters: via Meucci, 35 - 36040 Brendola (VI) - Italy
Tel. + 39 0444 1836680/1867452 Fax. + 39 0444 1867453
VAT: IT-04023100235
[email protected] www.dalcnet.com
