CBU REPEATER USB
Device Manual
Made in Italy
Rev. 31/05/2023
Pag.
2
/
3
DALCNET S.r.l, Registered office: Via Lago di Garda, 22
–
36077 Altavilla Vicentina (VI)
–
Italy
Headquarters: Via Lago di Garda, 22
–
36077 Altavilla Vicentina (VI)
–
Italy
VAT: IT04023100235
–
–
➢
SETUP CBU-REPEATER-USB CASAMBI REPEATER
Features:
The CBU-REPEATER-USB is a Casambi Bluetooth mesh repeater.
The device receives a Bluetooth signal, regenerates it and repeats it.
Led status:
The LED status is fixed to indicate that the power supply is properly connected to the device.
TYPE OF PROFILES
Type
# Profile
Name of Profile
Description
REPEATER
9948
REPEATER
The device acts as a Casambi signal repeater
.
➢
INSTALLATION
Can be used with a plug power supply or via PC USB output
➢
UNPAIR DEVICE FROM THE CASAMBI NETWORK
If the device is associated with a network to which you do not have the credentials and you want to associate it with a new one,
follow the settings specified in the Casambi APP in the "Nearby Devices" section. Once you have selected the unpair function and
started the procedure, turn off the main power of the power supply connected to the CBU-REPEATER-USB and turn it on again
after 1 - 2 seconds.
If the main power supply is switched off and on again quickly, unpair may not be done properly. Repeat the unpair sequence by
allowing 1 or 2 more seconds to elapse between the moment you turn off and re-turn on the main power of the power supply
1
.
1
The discharge time of the power supply secondary depends on the construction characteristics of the power supply used.
