DALBO RATOON XL, Инструкция по эксплуатации, Страница: 22 / 25

RATOON XL
Page 22
Replacing wear parts
Replace on a level surface with the machine connected to a tractor and sus-
pended from the lift. Support the machine properly, and do not walk beneath
it.
Do not walk under the machine unless it is properly supported.
Fig. 9
1. Remove bolt (A) and tip (B).
2. The tip (C) is welded on to the foot
(D). Cut the tip off the foot, and
weld a new one into place.
Why replace tips?
Replace the tips as required, and before the foot (D) is damaged.

Disconnect the negative cable from the tractor's battery before welding anything
on the machine. Failure to do so can damage the tractor's electronic system.
A
C
B
D