DALBO MEGAROLL 2130, Руководство пользователя

Страница: 34 / 38

MEGAROLL
32
Fig. 31
1. Loosen the set screws in the bearings and pull
off the bearings (A) from the shaft.
2. Loosen the bolts in the stop rings and pull off the
stop rings (B).
3. The roller rings can now be pulled off the shaft.
4. Mounting is carried out in reverse order.
5. Apply Loctite to the set screws in the bearings.
Tighten and loosen the bolts in the stop rings a few times, to ensure that they attached
to the shaft securely
Be aware that the roller rings are to be mounted next to each other.
Three middle sections
Fig. 32
1. Loosen the bolts at the ends (A) and remove the
washer.
2. The outer rings can now be replaced or removed
if you wish to get to the bearing.
3. Loosen the set screws in the bearings (B) and
pull the bearings off the shaft.
4. The roller rings can now be pulled off the shaft.
5. Mounting is carried out in reverse order.
6. Apply Loctite to the set screws in the bearings
and to the bolts (A) at the end of the shaft.
B
A
A
B