DALBO LEVELFLEX 150, Руководство пользователя

Страница: 6 / 26

LEVELFLEX
Side 6
Coupling and uncoupling
The front hanger is manufactured in accordance with the DS/ISO 730-1 category II.
If your tractor is not suitable for this type, please contact your distributor. The
arms of the front lift must be able to move sideways.
Coupling
First install the arms of the lift with the lift taps and hereafter install the top link.
The top link must be adjusted so the frame head is in a horizontal position and
thus, parallel with the base. Raise the implement, so the support legs are clear of
the ground and then place it in an operating position.
The angle of the lift arms
With the machine placed in a position of operation, aim at placing the tractor’s lift
arms in an angle preferably a couple of degrees above horizontal or at least hori-
zontal. In this way, the machine will more easily roll over any obstacles as the trac-
tor presses the implement tilted upwards and the steering will simultaneously be
maintained. (Steering can additionally be made easier if the top link is a bit short-
ened, so the frame head points a few degrees upwards at front).
Plate 1
Hydraulics
Depending on the type of LEVELFLEX 2000 there are different requirements for hy-
draulic tapping on the tractor.
LEVELFLEX Number of double-acting hydraulic tappings
Solid frame none
Solid frame w. crackeboard 1
Hyd. frame 1
Hyd. frame w. crackerboard 2
The hydraulic tubes are attached to a 1/2" female coupling, which is joined with
the front lift.

Remember to secure the lift arms and the top link joints with cotter pins.
A