DALBO FARMERDISC 300, Руководство пользователя, Страница: 5 / 24

FARMERDISC
Side 5
Safety
The safety alert symbol is used throughout this manual to identify important safety
warning messages concerning your safety, the safety of other users or the func-
tional safety of the implement. Observe all safety instructions and make them
readily accessible to all users of the equipment.
.
General
•
The operator must be thoroughly familiar with all safety precautions and opera-
tions of this equipment prior to using.
•
The safety signs on the FARMERDISC contain important instructions concerning
your safety, the safety of those around you, and the correct operation of the
machinery.
•
Never allow anyone to ride on the implement during operation or transport.
•
Never allow bystanders within the operating radius of the FARMERDISC, when
the implement is in operation. Operate the FARMERDISC only while seated in the
driver`s seat of the tractor.
•
Before performing any adjustments, maintenance or repairs on the machinery,
always unfold the FARMERDISC and lower the implement to the ground or secure
in transport position, set the tractor brakes, turn off the engine and remove the
ignition key in order to avoid unintentional ignition.
•
Remember to secure the support legs and the lift arms where applicable with
lynch pins.
•
Operate the tractor and FARMERDISC only while seated in the driver`s seat.
•
Always drive according to conditions.
•
Do not use the FARMERDISC unless all safety signs are installed. Replace defec-
tive safety signs immediately.
Hydraulic System
•
Never allow bystanders within the operating radius of the FARMERDISC when the
hydraulic system is activated, to avoid the danger of an individual being
crushed or pinched between the equipment.
•
Before performing maintenance or repairs on the hydraulic system, lower the
implement to the ground, relieve pressure in the system, turn off the engine and
remove the ignition key.