3
Assembling the appliance:
- Install the five castors on the base (18).
- Install the body (15) into the base (18) , and use the base lock nut (20) to
screw on the base tightly.
- Connect power connection line (12 ), and put it into the main body (15),
and tight up by holder fixed screw (13).
- Install the back grill (6) , and tight up by grill lock nut (5) on the motor cover
(9)
- Install the blades (4) on to the motor shaft (8), and anticlockwise by blade
lock nut (3).
Installation
- Be sure to remove all packaging material from inside
the appliance.
- Ensure that the fan is switched off from the supply mains before start any
installation or assembly operation.
- The appliance should be used with its base fitted.
- Install misting board (1) on the front grill (2) and screw up by misting board
lock screws (3).
- Put the front grill (2) and back grill (6) together, and screw to fasten by grill
ring,and tight up by grill lock nut.
ATTENTION
!
•
Make sure the products unplugged from the mains before filling or refelling
the water tank.
•
Only use water in the water tank. Do not add any chemicals, oils or other
additives.
•
Only use cold or lukewarm water in the water tank. The water must not be
warmer than 40°C.
Place the fan on a dry and stable surface and insert the plug on the
socket; the unit will emit a short
“
BIP
”
sound indicating that pow er
is supplied. For your convenience the unit can be operated by using
control panel in the main body or by using remote control included.
