SSP-100 Portable Speaker System Quick Guide
DD4941643
Rev 00
14 September 2021
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 2 of 2
Operation
Pairing Bluetooth
PAIR STATUS
LED flashes when in pair mode.
•
Apple Device:
a.
Search Bluetooth on your wireless device.
b.
The speaker device name is “300-798”. Select this device.
c.
A quick beep and solid
STATUS
LED indicate the device is
connected to the amp and ready to play content.
•
Android Device:
a.
Go to
Settings > Bluetooth
and ensure Bluetooth is
On
.
b.
The speaker device name is “300-798”. Select this device.
c.
A quick beep and solid lit
STATUS
LED indicate the device is
connected to the amp and ready to play content.
Press & hold
PAIR
until you
hear a tone
Every
DSP MODE
is the same;
use any one
NOTES:
• Bluetooth volume is only controlled by the connected device;
check device volume setting before starting content. Other
knobs on amplifier should remain turned fully counterclockwise if
not in use.
• If your device was the last device connected to the speaker, just
press and hold the
PAIR
button on the speaker until you hear the
tone. The device will connect if Bluetooth is turned on.
• To connect the included wired microphone, simply plug the XLR
cable into the
IN 1
or
IN 2
input. Use the corresponding volume
knob to adjust the volume to the desired level.
When using a personal phone to play content, it may be helpful to
adjust the following settings to avoid distracting noises/interruptions.
•
Apple Device:
a.
Go to
Settings > Sound & Haptics
.
b.
Disable
Keyboard Clicks
.
c.
Set to
Airplane Mode
while playing content.
•
Android Device:
a.
Go to
Settings > Sound & notification > Sound effects
.
b.
Disable
Touch sound
.
c.
Set to
Airplane mode
while playing content.
For More Information
For any questions, comments, or concerns, please contact Daktronics
Support Services:
United States & Canada
Toll Free: 1-800-DAK-TRON (325-8766)
Outside the U.S. & Canada
+1-605-275-1040
