SLD 110" Installation Manual
DD5065833
Rev 01
01 November 2022
201 Daktronics Drive
Brookings, SD 57006-5128
www.daktronics.com/support
800.325.8766
Page 1 of 27
Table Of Contents
Unpacking - Page 2
Installation Parts and Tools - Page 3
Part A: Upper Beam Installation - Page 4
Part B: Cabinets Installation - Page 8
Part C: Bottom Beam Installation - Page 17
Part D: Power Box Installation - Page 20
Part E: LED Module Installation - Page 25
Warnings and Disclaimers
• Ensure that all electrical work meets or
exceeds all local or national electrical codes.
• Provide the required power to the display as
listed on the product labels, specifications,
or site-specific riser drawings. The conductor
size may vary based on the length of the
power run.
• Consider implementing a separate circuit for
the display using an isolation transformer or
dedicated transformer.
• Daktronics assumes no liability for any issues
caused by line voltage fluctuations or other
improper power conditions.
