
RC-200 Handheld Controller
5
3 RC-200 Handheld Controller
Powering the Controller On & Off
Using the Keypad
• Press and hold the
<ON/OFF>
key momentarily to power on the controller. If the LCD
does not display text within a few seconds, the internal battery is most likely dead
and will need to be recharged. Refer to
.
• Press and hold the
<ON/OFF>
key for 5 seconds to power off the controller. The LCD
will display a power down message.
Using External Power
Plugging the wireless handheld controller into an external power
source via the power connector on top of the unit will turn it on
(and charge its internal batteries). The wireless handheld will not
turn off if connected to external power. When connected to
external power, the top line of the LCD will show a power plug
(
).
When external power is removed and charging is complete, the wireless handheld will
power down after a 5 second prompt to conserve battery power. Press any key during
the prompt after disconnecting external power to keep the handheld unit powered on.
Battery Operation
When the controller is powered on, an indicator on the top
line of the LCD shows the current battery status (
). The
three segments within the battery will gradually disappear as
the battery loses its charge.
Idle Time
When using battery power, by default the wireless handheld shuts itself off or “sleeps”
automatically after 45 minutes of inactivity. The idle time setting may be turned off as
described in
, but to increase battery life, be sure to manually turn
the unit off when it will be inactive for a long period of time.
Battery Recharging
A charger is contained inside the wireless handheld for recharging the batteries.
To recharge the batteries when not in use, simply connect an external power source
to the power connector on top of the unit. A completely discharged battery will take
approximately 1.5 hours of fast charging to recharge.
A power adapter is included with the wireless handheld controller for recharging
the batteries and providing external power. Daktronics also offers a charging station
capable of recharging up to 6 units at a time. Refer to
DWG-3639831
in
Appendix A
for
more information on charging station operation.
Figure 6:
External
Power Detect Status
Figure 7:
Battery Status
Содержание RC-200
