Daktronics GENERIC GALAXY AF-6200 Series, Руководство пользователя

Страница: 8 / 28

Mechanical Installation
4
Shoe Mounting (Single Face or Double Face)
A bracket may be designed to suspend the display from a support structure with the use
of two shoes. The shoe-mount method uses a shoe, or a metal base plate with a support
tube extending from its center.
Power and Signal
For all methods:
This display has many potential entrances for power or signal cables. Possible signal and
power entrances are marked with small indentations on the cabinet. After determining
a power and signal entrance, punch the appropriate size hole and refer to the Electrical
Installation (p.5) section for electrical installation. Waterproof any hole punched or
drilled in the display with either a watertight plug or with conduit to prevent water from
entering the display.
Drill from the inside of the display to ensure the components within the display are not
damaged. After drilling, remove any metal filings that might interfere with the operation
of the components within the display.
For Shoe-Mounting Method
The electrical connections can also route to the sign through the support tubes of the
shoes. If using this method, drill a hole in the display at one of the center punches
designated for power or signal. Align this hole with the support tube. Use watertight
sealant between the display and the shoe to prevent water from entering the sign.
Note: If using this method, conduit must be used—the support tubes are not a viable
raceway.