Daktronics Galaxy Series, Руководство пользователя

Страница: 14 / 90

Finally, Daktronics part numbers are commonly found on drawings. Those part
numbers can be used when requesting replacement parts from Daktronics Customer
Service. Take note of the following part number formats:
0P-1195-0001
SN: 6343
05/19/99 REV.1
Figure 7: Typical Label
•
“0P-_ _ _ _-_ _ _ _” denotes an individual circuit
board, such as the internal fiberboard.
•
“0A-_ _ _ _-_ _ _ _” represents an assembly, such
as a circuit board and the plate or bracket to which it
is mounted. A collection of circuit boards working
as a single unit may also carry an assembly label.
•
“W-_ _ _ _” symbolizes a wire or cable. Cables may
also carry the assembly numbering format in certain
circumstances. This is especially true of ribbon
cables.
Most circuit boards and components within this display carry a label that lists the
part number of the unit. If a circuit board or assembly is not listed in the
Replacement Parts List in Section 4.11 , use the label to order a replacement. A
typical label is shown in
Figure 7
. The part number is in bold.
Introduction
1-8