Daktronics Galaxy AF-3155, Руководство пользователя

Страница: 38 / 87

Venus
®
1500 Radio Client
Reference Drawing:
System Riser Diagram, QC Outdoor Radio, Gen 2..... Drawing A-185359
Schematic, Internal, W/Quick Connect........................ Drawing B-177662
A display that is controlled using a radio requires a Server radio connected to the
control computer, and a Client radio at the display. The radios must be within line-
of-site of each other.
Figure 31
below and Drawing A-185359 show the system layout to the Server radio
through a J-box. The Client is mounted near the display, and it is supplied with 25
feet of weather resistant cable. One end of the cable is pre-terminated to TB1 inside
the radio enclosure, and a quick connect plug is terminated at the other end of the
cable. The quick cable connects to the primary display.
Figure 31: Radio Display Layout
1. Connect the DB9M to DBF serial cable from the computer’s serial port to
the J-box labeled “V1500 PC Connect”. Connect the 18 AWG, 6-conductor
cable from the J-box at the computer to the Server radio. The distance from
the J-box to the Server cannot exceed 1000 feet. Refer to the Venus 1500
Radio Manual,
ED13932 , for J-box and Server connections.
2. Using the quick connect cable as shown in
Figure 32
, connect from the
Client Radio to the RS232 jack (J33) on the back of the primary display.
(Secure any additional cable to prevent it being pulled loose by weather or
vandalism.)
Figure 32: Radio Client Connection
Electrical Installation
3-18