
Troubleshooting
15
All Sport Radio Receiver
1�
The radio receiver has a plastic cover
with a window to view status indicators
(
Note:
While it is necessary for the display
to be powered on to check the
indicators, always disconnect
power before servicing.
2�
Remove the four screws in each corner
using a #2 Philips screwdriver and lift off
the cover.
3�
Use a small flathead screwdriver to set
the
CHAN
and
BCAST
switches to a new
channel and broadcast group (1-8) as
needed. Leave
FUNC
set to “1”. Refer to
.
4�
Screw the cover back on and securely
close the access panel.
5�
Enter the new radio settings into the
console/scoring app to test the radio
control (refer to the appropriate
).
Refer to the
Gen VI Radio Installation Manual
(
)
for more information.
RC-200 Base Station
1�
The radio base station has a plastic cover
with a window to view status indicators (
).
Note:
While it is necessary for the display to be powered on to check the indicators,
always disconnect power before servicing.
2�
Remove the four screws in each corner using a #2 Philips screwdriver and lift off the
cover.
3�
Use a small flathead screwdriver to set the
CHAN
and
BCAST
switches to a new
channel and broadcast group (1-8) as needed. The
FUNC
switch will typically be set
to “2” for most scoring displays. Refer to
4�
Screw the cover back on and securely close the access panel.
5�
Enter the correct channel setting, broadcast group setting, and sport code into the
RC-200 handheld controller to test the radio connection.
For more information, refer to the
Remote Control System RC-200 All Sport Operation
Manual (
)
.
2.4GHZ
LL-2567
REV 01
POWER
RADIO IN RANGE
DATA OUT
DAKTRONICS
WIRELESS RECEIVER
Status Indicators
Remove Cover to
Access Switches
Figure 12:
Radio Receiver w/ Cover
FUNC
CHAN
BCAST
X1
X2
J4
0
0
0
1
1
1
CHAN
GEN V
GEN VI
BCAST
CHAN
FUNC
Jumper may only be set to one
BCAST setting at any time
BCAST 1
BCAST 2
Figure 13:
Radio Receiver Switches
Содержание FB-2500 Series
Страница 34: ...This page intentionally left blank...
Страница 42: ...This page intentionally left blank...
Страница 44: ...This page intentionally left blank...
Страница 48: ...This page intentionally left blank...