Daktronics BA-2000 Series, Руководство пользователя, Страница: 35 / 112

Scoreboard Troubleshooting 29
BA-2018
Scoreboards capable of displaying speed of pitch may also have separate radio
settings for the second All Sport console controlling those digits:
BA-2008, BA-2009 BA-2018
Broadcast Channel
Broadcast Channel
Note: If these settings do not appear, the radio receiver(s) may need to be
repaired/replaced.
The first values are the broadcast settings (“b1”), and the second are the channel settings
(“C1”). These values must match the settings within the console. The speed of pitch
controller must be set to a different channel than the main scoreboard controller.
To make sure the current radio settings match the receiver in the scoreboard, refer to the
operation manual of the particular control console being used (see
Section 1.4 ).
Radio Interference
If it has been determined that a nearby scoreboard‟s radio signal is interfering, the broadcast
and channel settings of the radio receiver inside the scoreboard(s) must be changed.
For more information, refer to the
Gen V Radio Installation Manual ED-13831, available
online at www.daktronics.com/manuals .
1. To locate the radio receiver, look for the antenna sticking out the front of the
scoreboard, typically between the STRIKE and OUT digits (
Figure 25 ).
2. Open the access panel to which the receiver is attached as described in Section 5.2 .
Figure 25: Radio Receiver Location