•
DEACTIVATE ALL SWITCHES
• Open latch on non-LED / FLASHLIGHT side of Powerbox
• Locate fuse lead coming off of positive (red) terminal of battery
• Flip open rubber fuse covering
• Determine whether or not fuse needs replacement through
visual inspection
• If needed, replace the fuse with an ATC / ATO 10 amp fuse
FUSE REPLACEMENT
• Activate
POST TERMINAL SWITCH
•
POST TERMINALS
are now active for use
NOTE:
The Powerbox is charged through the
POST TERMINALS
NOTE:
POST TERMINALS
are on a separate circuit, and
do not require the
MASTER POWER SWITCH
to be active
POST TERMINAL USE
