Dakota GPS-50-2, Руководство пользователя

Страница: 7 / 20

7 MAN #650519C
Setup Using BIM cable to VFD/VHX/HDX/RTX:
Cannot be connected to BIM-01-2 series
GPS-50-2 BIM speed MUST be enabled. See page 15 for details.
Setup VFD3 / VFD3X
Using speed from the GPS-50-2 without a BIM-01-x connected
➢
Connect the GPS-50-2 to the instrument system control box with the supplied BIM power/data cable(s).
•
Hold SW1 (I) for the VFD3 control box, and turn key on.
o
Speed will display

and the message display will show SETUP .
•
Release SW1. The speed will display

and the message center will display SPEED .
•
Press and hold SW1 (I) until
“ – “ and
SPEED are displayed.
•
Release SW1. Speed will display

and the message center will display SENDER .
•
Press and hold SW1 (I)
until “ – “ and
SENDER are displayed.
•
Release SW1 (I). Speed will display

and the message center will display current setting
o
Default setting is
NORMAL
•
Tap SW1 (I) until

and BUS are displayed
•
Press and hold SW1 (I) until speed displays “ – “, and message center displays
DONE
•
Release SW1 (I). Speed will display

and the message center will display ADJUST
•
Tap SW1 until

and DONE are displayed.
•
Press and hold SW1 (I)
until speed displays “ – “ and the message center displays
DONE
•
You may turn off the key now.
Setting the World Clock Time Zone Hours
➢
The time from the GPS is setup through the VFD3 BIM setup.
•
Hold SW1 (I) for the VFD3 control box, and turn key on.
o
Speed will display

and the message display will show
SETUP
.
•
Release SW1. Speed will display

and the message center will display
SPEED
.
•
Tap SW1 (I) until

and BIM are displayed.
•
Press and hold SW1 (I) until “ – “ and
SCAN X is displayed.
o
X = the number channels. Default is “
3
”, (Clock, Compass, Altimeter).
•
Release SW1 (I).

and
SCAN
will be displayed.
•
Tap SW1 (I) once for

and SETUP to be displayed.
•
Press and hold SW1 (I) until “ – “ and
SETUP
are displayed.
•
Release SW1 (I). Speed will display “  ” and the message center will display
CLOCK .
o

represents the clock is using ID channel 7.
•
Press and hold SW1 (I) until
“ – “ and
LABEL are displayed.
•
Release SW1 (I).

and CLOCK are displayed.
o
The label for the clock is “
CLOCK
”, and cannot be changed.
•
Hold SW1 (I) until “ – “ and
CLOCK
is displayed.
o
If the system has a second message center, it will also display
CLOCK
.
•
Release SW1 (I),

and the hours will display in the message center.
•
Tap SW1 (I) to change the hours in the message center.
o
GPS minutes are atomically accurate, only the hours are changed for the time zone
•
Press and hold SW1 (I) to save hours, until “ – “ and the hours are displayed
•
Release SW1 (I).

and DONE are displayed.
•
Press and hold SW1 (I) until “ – “ and
DONE
are displayed.
•
Release SW1 (I). The speed will show the software version and message will display
INFO
.
•
You may turn off the key now.