Dakota 65 TREE Transplanter, Руководство оператора

Страница: 11 / 16

11
A. Using the RH GATE switch (5), fully
close
the right gate.
B. Using the LH GATE switch (2), open the left gate.
C. Using the RH GATE switch (5), open the right gate.
25. Press the OUTRIGGER switches (4 & 6), raise each
outrigger to the transport position.
26. Disengage the power take off; then release the parking
brake and slowly move the truck a small distance from
the transplant site. Set the parking brake and engage the
power take off.
WARNING
If the ground is uneven or unstable, use extreme
caution and slow speed when moving the
Transplanter in the vertical position.
27. Close the gate using the following procedure.
A. Using RH GATE switch (5), fully close the right gate.
B. Using LH GATE switch (2), close the left gate.
C. Using RH GATE switch (5), slightly open the right
gate to lock the gate halves together.
28. Press the Mode switch until Mode b is displayed; then
using SPADE control switches (1, 3, 4, & 6) fully lower
the spades.
29. Press the Mode switch until Mode A is displayed. Fully
raise the frame (switch 3); then tilt to the transport position
(switch 1).
30. Press the POWER switch to turn off the transmitter; then
return the transmitter to the stow location.
31. Disengage the power take off; then release the parking
brake.
CAUTION
Be sure to disengage the power take off before
operating the truck engine at speeds above 1500
rpm. Damage to the hydraulic system or pump may
result from excessively high rpm.