manualshive.com logo in svg

DAKOTA ULTRASONICS ZX-6 DL, Руководство по эксплуатации

Поделиться
Скачать
DAKOTA ULTRASONICS ZX-6 DL Скачать руководство пользователя страница 51

ZX- 6 DL 

Ultrasonic Multi-Mode Thickness Gauge 

 

47 

 

6)  Press the 

 key to display the confirmation screen.  

CLR?

 will be 

displayed, as well as a flashing 

Yes/No

 option. 

7)  Press the 

 key for 

YES

, and the 

 key for 

NO

.  The edit icon 

will be illuminated and flashing. 

Note:

  

Pressing the 

 key prior to pressing the 

 

key will abort to the 

measurement screen without clearing the file.

 

8)  Press the 

 key to confirm 

Yes/No

 selection and return to the 

measurement screen. 

Note:

  

If Yes was selected a BUSY message will briefly be displayed 

confirming the file is being cleared.

 

 

9.5 Clear All Files 

If a number of files in the 

ZX-6 DL

 contain old data, or data that has been previously 

downloaded, clearing all the files might prove an efficient option. 
 
The following procedure outlines this process: 
 

Clear Files 

 

1)  Press the 

 key to access the data files and display the current file open. 

2)  Use the 

 

 keys to scroll to the 

CLR ALL

 option. 

Содержание ZX-6 DL




























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды