Dakota Ultrasonics
18
Alarm Mode
The Alarm Mode feature of the PX-7 allows the user to set an audible
and visual Hi / Lo parameter when taking measurements. If the
measurement falls below or above the Hi / Lo limits, set by the user, a red
light will be illuminated on the front panel of the gauge and the beeper
sounded. This improves the speed and efficiency of the inspection process
by eliminating constant viewing of the actual reading displayed. The
following pages outline how to enable and set up this feature:
Using the Beeper
1) While the unit is off, press and hold down the
ALRM
key.
2) Press
ON/OFF
key to power up the unit.
3) Release the
ALRM
key -
BEEP ON
or
BEEP OFF
will be displayed
enabling or disabling the beeper.
4)
Repeat steps 1 through 3
to toggle between
BEEP ON
or
BEEP
OFF
.
www.
.com
1.800.561.8187
