manualshive.com logo in svg

DAKOTA ULTRASONICS PR-8V, Руководство по эксплуатации

Поделиться
Скачать
DAKOTA ULTRASONICS PR-8V Скачать руководство пользователя страница 60

 

56 

CHAPTER NINE 
ADDITIONAL FEATURES OF THE PR-8V 

9.1 High Speed Scan 

The High Speed Scan feature of the 

PR-8V

 increases the overall sample rate from 

the standard 4 measurements a second to 32 measurements a second.  This feature 
enables a user to make scanned passes over an arbitrary length of the test material, 
while still maintaining a reasonable representation of thickness over the scanned 
area or region.  This feature is typically used for scanni ng cylinder walls to speed up 
the overall inspection process.   

Note:

  It is recommended that at least 2-3 scans are made per clock position, and all 

clock positions are scanned in each cylinder.  By taking the time to do the multiple 
scans in all the clock positions of the cylinder, the user can have some level of 
confidence that measurements obtained are representative of the individual cylinders 
in the block.  When the user is scanning a cylinder, the display will continue to be 
updated during the scan process, and when the transducer is removed, the 

PR-8V

 

will display the minimum reading found.  The procedure to use the 

SCAN MODE

 

feature is outlined below:  
 

Using the Scan Mode 

 

1) 

Press the 

MENU

 key once to activate the menu items tab.  Press the 

MENU

 

key multiple times to tab right and the 

ESC

 key multiple times to tab left until 

the 

UTIL 

menu is highlighted and displaying the submenu items.

 

2) 

Use the 

UP

 and 

DOWN

 arrow keys to scroll through the sub menu items 

until 

SCAN MODE

 is highlighted.

 

3) 

Use the 

LEFT

 and 

RIGHT

 arrow keys to toggle the 

SCAN MODE

 on/off.

 

4) 

Press the 

MEAS

 key to return to the measurement screen.

 

 

Содержание PR-8V
































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды