Dakota Micro, Inc.
DMOV
-
RH User Manual
Rev: 06/29/17 Page 3 of 12
Author: CNR
IV.
STANDARD FEATURES
Allows for easy wireless upgrade for your OverView system
Your receiver is conveniently powered from your OverView monitor for mobile applications
Easy access RCA output jacks enable you to directly view your image on your own television
You can have as many as 4 cameras wireless
All transmitters & receivers are available individually
Waterproof Transmitters can be mounted outside in hot, cold or wet conditions
Transmits on powerful and reliable 2.4GHz bandwidth
Optional antennas allow you to view cameras up to 3+ miles away (with line of sight)
V.
PARTS OF A WIRELESS SYSTEM
A.
Standard Wireless Inputs (front)
For additional video features other than OverView
®
Transmitter (PN: DMOV‐RHTX)
1.
Covered ‐ External audio input not available on this model
2.
External video input
Receiver (PN:DMOV‐RHRX)
1.
Covered ‐ External audio output not available on this model
2.
External video output
B.
Standard Wireless Inputs (rear)
Transmitter (PN: DMOV‐RHTX)
1.
Power On Indicator LED
2.
DC Power IN (2000mA)
3.
Power out to camera. Video signal in from camera.
4.
AV channel select (4 channels)– toggle down to select
channel, set Transmitter and Receiver to same channel.
5.
Antenna Input (Reverse SMA)
6.
3db Antenna
Receiver (PN: DMOV‐RHRX)
1.
Power On Indicator LED
2.
DC Power IN (300mA)
3.
Power in from monitor. Video signal out to monitor.
4.
AV Channel Select (4 channels)– Toggle down to select
channel, set Transmitter and Receiver to same channel
5.
Antenna Input (Reverse SMA)
6.
3db Antenna
NOTE: On receiver, no power adaptor should be used when plugged into OverView
®
monitor, as the monitor will supply the power, an
Dakota Micro, Inc. 1500 mA (or greater) adaptor must be used on OverView
®
monitor power input.
