DM(AG)-H7(H9)(WH7) User Manual
Rev: 07/30/20
Page 3 of 8
Author: CNR
III.
IMPORTANT INFORMATION REGARDING ANALOG AND AHD EQUIPMENT
•
After the introduction of the complete line of AHD Monitors, Dakota Micro will no longer offer Analog monitors.
•
All analog Dakota Micro wireless equipment
will not
work with AHD Monitors. Please contact Customer Service
for help with your wireless set up.
IV.
MONITOR MOUNTING
A.
Mounting Precautions
Remove your monitor carefully from packaging and inspect all mounting hardware. Mounting location is the most
important part of the monitor installation as it ensures you the maximum visual benefit from your
AgCam®/EnduraCam
®
system. With that said, when installing your monitor, ensure to follow these three (3)
precautions:
1.
The monitor is out of direct sunlight. This will prolong the life of the unit as well as ensure optimum visibility.
2.
The monitor does not obstruct view.
3.
The monitor does not interfere with the normal operation of equipment.
WARNING:
Dakota Micro, Inc. is not responsible for any damages caused to your monitor, or yourself, due to the improper installation or use
of a suction cup monitor mount, whether it be product sold by DM or product purchased from another source.
B. Universal Bracket Mounting
1.
Hold monitor U-bracket in place on monitor.
2.
Attach bracket with included wing bolts.
C. Finalizing Universal Bracket Installation
1.
With the mount and monitor attached, find and
mark the desired position for the monitor.
2.
Remove the monitor from the mount.
3.
Attach the monitor to the mount and tighten the
wing nuts.
*Use ONLY the nuts included in kit, bolts longer
than 10mm will damage your monitor
V.
INSTALLATION
A. Monitor Wire Harness Details
1.
Input to Monitor
2.
AV1-4 Event Trigger Wires
3.
Power Input
4.
RCA-Video Output
5.
AV1 - Audio/Video Input
6.
AV2 - Audio/Video Input
7.
AV3 - Audio/Video Input
8.
AV4 - Video Input
