AG-H9QDTM2 User Manual
Author: MES Revised by: MES Rev: 09/07/21 Page 5 of 12
V.
CABLE ROUTING TIPS & WARNINGS
There are two (2) lengths of cable that come standard with our
AgCam®
camera kits: One (1) 20’ and one (1) 60’.
Extra cables in
varying lengths available for purchase through your local AgCam® dealer.
A.
Cable routing is important; where you choose to run the cables should not interfere with the normal operation of the
machine or any safety equipment.
B.
ALWAYS
be aware of any “pinch points” or other potential hazards to the cable(s).
C.
Secure all cables to vehicle/equipment using cable clips, zip ties or other style fasteners.
D.
If you intend to use your AgCam® for short length PTO operated implement, avoid excess cable lengths, if possible. When
you decide on a location, you should fix the camera to a permanent bracket using ¼ inch bolts and attach any loose cable
securely so there is no chance of entanglement in the PTO or other moving parts.
E.
If you use your AgCam® to monitor a combine hopper or other combine operations, take care to remember that combines
have many moving parts. Use extreme care when routing cables, and it is strongly recommended that you use bolts to secure
the camera. While it would be sufficient to use the magnetic base for monitoring purposes during road travel, it is advised
to secure the camera with bolts during operation of the combine.
