Manual # 650408B
5. With the cut lines marked, you can now cut the center of the dash out to fit the new VHX
display. Be sure to prep the rest of the car as needed to protect the interior and
especially glass from sparks and metal shards. Use the metal cutting tool of your choice
and work slowly as to not overheat the metal and damage the paint in a visible area.
6. Once the VHX display fits the new opening, place the ABS Back Plate over the four
center studs. These will help hold the display to the bezel. Then, secure the VHX
system to the dash with the two (2) provided mounting brackets on each end, with the
supplied 10-24 nuts. Before final tightening, double check alignment of display.
Mounting Brackets
ABS Back Plate
