Manual # 650385A
WARNING:
This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
4. As the assembled cluster is installed into the dash, take care when routing these
cables to the control box to avoid pinching. Re-install the cluster into the vehicle and
refer to the main manual for wiring instructions to complete the VHX installation.
3. Connect the two CAT5 cables and the 3-pin clock harness (included) to the Dakota Digital system.
Either CAT5 cable can be used on either jack on the instrument system as well as the control box.
Refer to the Operating Manual for Clock / Auxiliary Displays for installation procedures of wiring the
clock display.
