Manual # 650432B
2. Attach the VHX system to the fiberglass insert using the provided hardware from Marquez Design
as well as the L-bracket. The lower section of the VHX system will mount to the lower half of the
dash using hardware also provided by Marquez Design.
3. With the VHX system mounted to the fiberglass dash, attach the provided CAT5 Cable and
the 3-Pin Switch Harness to the back of the VHX display. Carefully route the other ends to the
control box mounting location and refer to the main manual and manual 650431 for wiring
instructions and operation.
L-Bracket
