Manual # 650641
6. Secure the RTX system to the bezel with the
six (6) screws and lock washers provided.
5. Next, cut the supplied foam into four small pieces, approximately 1” long, and install four foam
blocks into the bezel to help prevent any rattles of the lens and bezel. The foam should sit down in
the bezel and adhere to the outer edge, sticking up about 1/8” so it will compress against the lens
once the system is installed.
Foam
7. Connect the provided harness and
the buzzer (optional for audio
feedback) to the back of the RTX
system.
Buzzer Connector
