Manual # 650800
9. Install the A/C / heat controls using the previously fastened #10-32 x
7/8” screws in the provided
mounting location.
8. Using the six (6) original screws, Mount the RTX system with OEM bezel and switches to the
vehicle’s dash. The OEM bezel may need to be tightened or loosened for an optimal fit.
7. If the original parking brake indicator is desired, plug in the provided indicator harness in the OEM
parking brake location. Do not wire this harness to the system’s control box. The White/Green wire
goes to the indicator circuit, and the White/Black wire goes to the chassis to ground.
Indicator Harness
