Dakota Digital MLX-3004 Скачать руководство пользователя

Страница: 1 / 11

MAN#650678:C

MLX-3004

3 3/8” SPEEDOMETER/TACHOMETER

Direct plug-in instrument for 2004-2013 Harley Davidson Dyna (fuel injected) and Sportster and 2008-2010 Rocker

Included parts:

Installation

The MLX-3004 is a direct-fit replacement and uses the original housing, gaskets and screws.

1. On tank-mount models, begin by removing the dash. All models: remove the two screws on the back of the gauge

housing, then unplug the factory gauge, noting the position of the rubber gaskets; one on the front between the
gauge bezel and housing and (on handlebar-mount applications) one on the back between the housing and the
back plate.

2. Transfer the original gaskets to the MLX-3004 then connect the large factory connector. Also connect the optional

MBM harness if readings for compass, boost or air pressure are desired. Route the MBM harness under the seat.

3. Secure the new gauge using the original screws.

IMPORTANT NOTE!

This gauge has an odometer preset option that is only available for the first 100 miles (160km) of

operation. See “preset odometer” on page 7 for instructions.

MLX-3004 display

MBM harness

Содержание MLX-3004












Результаты поиска

Содержание MLX-3004

Отзывы:

Похожие инструкции для MLX-3004

Бренды по названию

Популярные бренды

Dakota Digital MLX-3004, Руководство по установке

Результаты поиска

Содержание MLX-3004

Отзывы:

Похожие инструкции для MLX-3004

Бренды по названию

Популярные бренды