Dakota Digital MCL-3K-OIL Скачать руководство пользователя страница 4

Manual # 650338 

 
 

Please note that the word “switch” in the setup instruction is in reference to the GREEN wire, you 

can install any momentary push button switch and use that or simply strip the wire back and hold or tap 
the GREEN wire to a +12V source for set up.  Once setup is complete, cover the end of the GREEN wire 
and secure it so it cannot accidentally be shorted. 

 

To enter setup: 

  Press and hold the switch while turning the key on, the gauge should light and show 

xx”  (xx is 

the software code and may be used for tech support). 

  Release the switch and 



” 

should be displayed.  Looking at the table, on previous page, press 

and release the switch and scroll th

rough until you see “



” on the display; this is the screen you 

need to get to in order to enter the oil pressure setup. 

  Press 

and hold the switch until “



” is displayed, release the switch and the current sender 

selection will be displayed. 

  Press and release the switch until the correct sender type is displa

yed.  “



” for ’96-’98 stock 

sender,

 



 for 

‘99-up stock sender

, “



” for Dakota Digital 75 psi, “



” for Dakota Digital 150 

psi. 

You must select the correct sensor or the gauge will not display correct values!

 

  Once the correct sensor type is displayed, p

ress and hold switch until “



” is displayed.  Release 

the switch and a number should be displayed. This indicates low voltage warning point. 

  Press and release the switch until the desired low pressure warning point is displayed. 

  Press and hold the switc

h until “



” is displayed, then release the switch. 

  Press and release the switch until the desired high pressure warning point is displayed. 

 

Press and hold the switch until “



” is displayed, then release the switch. 

  Press and release the switch to change 

the update rate between fast “



” and slow “



”. 

 

Press and hold until 



” is displayed to save the settings.  

 

  Turn off key. Setup is complete. 

 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any 

questions or problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most 
problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise 
Authorization number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure 

to include the RMA number on the package, and include a complete description of the problem with RMA number, your full name and address (street address 
preferred), and a telephone number where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from 
your place of purchase.  Send no money.  We will bill you after repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in 

material or workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, suc

h defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty 

does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, 
neglect, or accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be 

limited to the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought 
within a period of 24 months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than 
expressed herein in connection with the sale of this product. 

 

WARNING:

 This product can expose you to chemicals including lead, which is known to the State of California to 

cause cancer and birth defects or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

 

 

 

Содержание MCL-3K-OIL

Страница 1: ...orrect pressure sensor for you application INSTALLATION First read and familiarize yourself with all of the components and this manual The first step is to remove the seat and disconnect the negative side of the battery as with any electronic install Once the battery is disconnected you are ready to start REMOVAL OF FACTORY GAUGES Remove the outer fairing this will vary from model to model please ...

Страница 2: ...IRING The three tab connecter toward the bottom of the back side of the MCL 3K gauge is designed to plug directly into the stock harness This will provide the gauge power ground and sensor connection If the wiring harness plug is not available wire according to the drawing on next page Standard female spade connectors can be used to make a connection to the gauge The second connector toward the to...

Страница 3: ...ou have an MCL 3K tachometer and choose to wire it this way Back View of Gauges Dim Input active high 12V BLUE wire Switch Input active high 12V GREEN wire Optional momentary push button switch 12V KEY ON POWER 12V KEY ON POWER Optional toggle switch Continue wiring to other MCL 3K gauges GAUGE SETUP The oil pressure gauge setup has options for sensor selection update rate and a low pressure warni...

Страница 4: ...g installing one of our products Please read through the Troubleshooting Guide There you will find the solution to most problems Should you ever need to send the unit back for repairs please call our technical support line 605 332 6513 to request a Return Merchandise Authorization number Package the product in a good quality box along with plenty of packing material Ship the product by UPS or insu...

Отзывы: