background image

 

 

MAN# 650098-B 

 

 

 

 

Battery is very low. 

 

Recharge or replace vehicle battery. 

 

 

 

 

Clock is damaged. 

 

Return clock for repair.  (contact factory)  

 

Gauge will not display the  

Temp sensor is not connected  Check sensor connections to gauge. 

  temperature.   

 

  correctly. 

Temperature readout shows 

Gray wire is shorted to ground.  Check connections to gray wire. 

  “---“.   

 

 

Sensor harness is pinched or 

Inspect sensor harness for damage. 

 

 

 

 

  shorted. 

 

 

 

 

Sensor temperature is below 

Warm sensor up and watch for change. 

 

 

 

 

  -39F. 

 

 

 

 

Sensor is damaged. 

 

Return sensor for repair.  (see instructions) 

 

Temperature reads in C  

Blue wire was powered before  Make sure the blue wire does not have power 

  Instead of F.   

 

  the white/red was connected.    all of the time.   

 

 

 

 

 

Technical specifications 

 
Minimum operating voltage 

7 volts 

Maximum operating voltage  - 

17 volts 

 

(operating at or near maximum voltage for an extended time can damage unit) 

Maximum temperature reading 

250

°

F (125

°

C) 

Temperature accuracy 

 

±

2

°

F (

±

1

°

C) 

Clock accuracy 

 

 

±

2 minute per month (±0.5 with adjustment) 

Compass accuracy   

±2 degrees (external disturbances can cause higher errors) 

Standby current draw (key off) - 

0.007 A 

Typical current draw (@ 13.8V) 

0.15 A 

 
 
 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any questions or 

problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the RMA number 

on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number where you 
can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  Send no money.  We will bill you after 
repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or 

workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty does not 

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be limited to 

the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 
months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the 
sale of this product. 

 

 

  

    4510 W. 61ST St. N.,  Sioux Falls, SD  57107 

 Phone: (605) 332-6513      FAX: (605) 339-4106  

 

 
 

    ©Copyright 2004 Dakota Digital Inc. 

 

Содержание HLY-3171

Страница 1: ...etween the different screens MOUNTING The gauge requires a round hole 2 1 16 in diameter It should be inserted into the opening from the front and the U clamp will be installed from the back Tighten the two nuts on the U clamp so that the gauge is secure Gauge depth to the back of the case is 1 1 2 Gauge depth including the mounting studs is 2 3 8 POWER Connect the red wire from the main harness t...

Страница 2: ...brated This is described in the Setting the time and calibrating gauge section front cable Setting the time and calibrating gauge The switch on the front of the lens is used for adjusting the time setting up the temperature unit setting up the compass and making calibration changes At any time during the setup you can turn the key off and all of the changes you made will be saved The next time the...

Страница 3: ... to negative ground red and white red to 12V power Clock is damaged Return clock for repair see instructions Clock will not turn off when The red wire has constant Connect the red to switched power the the key is off power white red to constant power Clock lights up but does Loose connection on white red Reconnect white red wire not read correctly power wire Poor ground connection Move ground to d...

Страница 4: ...oduct in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include the RMA number on the package and include a complete description of the problem with RMA number your full name and address street address preferred and a telephone number where you can be reached during the day Any returns for warranty work must include a copy of the ...

Отзывы: